Mobile four outlet air cooling fan

There are also significant differences in the effectiveness of different types of Industrial Fans in the workplace. In order to ensure that industrial fans can be used in the workplace and achieve the best state, we must be cautious in the selection of Commercial Fan types. The best standard for judging fan types is the actual needs of the site, and the types of fans used vary depending on the environment.

Due to the fact that the air cooler uses evaporated water to carry away heat and achieve cooling, it should be placed in a well ventilated space. If the environment is sealed and the water evaporated by the cold air fan circulates throughout the entire space, the water will not evaporate until it reaches a certain saturation level, and thus the cooling effect cannot be achieved.

When using Water-cooled Air Conditioner, attention should be paid to:

1. If it is used for the first time and the machine is installed, the manufacturer should debug and clean it before turning on the cold air fan.

2. Try to place it horizontally as much as possible, avoid tilting, and ensure that the electrical parameters of the unit are consistent with the power supply.

3. When a newly used air conditioner or when it is not in use for a long time, clean water should be added before use and added to the highest position before use. After a period of use, attention should be paid to adding water in a timely manner when the water level is close to the lowest to ensure the cooling effect.

4. After filling the water tank with water, the overall ambient temperature drops to the best effect after a few minutes of startup. If you want the effect to be significant, you can add cold water or ice water when adding water, which will have a more significant cooling effect.

5. There will be two ice crystals in the unit, which can be stored in the refrigerator for a period of time before being installed and used again, resulting in a more significant operating effect.

6. The inner louver of the air outlet can be electrically swung in a wide angle and left and right directions, while the outer louver can adjust the orientation of the grid according to the up and down directions of the workstation.

Cleaning of workshop air coolers: Normally, it should be cleaned every 3-7 days. The cleaning cycle should follow the following principles: when the dust around the cold air fan is very large, it should be cleaned once every 1-2 days; When the weather is dry (such as no rain for a long time, continuous high temperature weather, etc.), it should be cleaned about once every 2 days; If the air conditioner has not been used for a long time, it should be drained and cleaned before reuse; When there is an unpleasant odor, the air cooler should be cleaned immediately. Do not use the air conditioner or refrigeration function in winter, and do not clean the air conditioner.