High air volume industrial air cooler

The principle of industrial cold air fans is to use a circulating water pump to continuously discharge the water tray, and evenly sprinkle water on the wet curtain of the cold air fan through a water distribution system, allowing outdoor air to fully exchange capacity with water molecules through the water curtain. Clean and fresh air that cools down due to water evaporation and heat absorption will be pressurized and pumped indoors by the fan, So the heat and exhaust gas emitted from the workshop can be discharged using Water-cooled Air Conditioner.

Is the air change rate of the air conditioner as high as possible? The answer is no, because the working environment of each air conditioner is different, and different working environments require different air exchange rates. Therefore, corresponding air exchange rates should be determined based on different environments. In places where there is generally no heating equipment, the pedestrian flow is very small, and the air exchange rate in such places is generally 25-35 times/h. If the air exchange rate is too large, it will cause waste, such as in offices, small meeting rooms, etc; If it is a place without heating equipment but with dense pedestrian flow, the required ventilation frequency for such places is 30-40 times/h, such as supermarkets, hospitals, etc; If it is a workshop with heating equipment, the air exchange rate in this location is 50-60 times/h.

Compared with traditional air conditioning systems, the investment in air conditioners is less, and the equipment does not take up too much space. The installation of the equipment is simple and convenient. The power consumption of the cooling fan during operation is very small, therefore the operating cost is also relatively low. The noise of the air cooler during use is relatively low, and it can unknowingly bring us fresh air while cooling down. These advantages of cold air fans are incomparable to traditional air conditioning, so many workshop buildings choose cold air fans, Negative Pressure Fan, and HVLS Fans as cooling equipment.