Ventilation large ceiling fan for aquaculture farm

Ventilation large ceiling fan for aquaculture farm

$26671-3 Set/Sets

$26574-10 Set/Sets

$2647≥11Set/Sets

Payment Type:	T/T
Incoterm:	FOB
Transportation:	Ocean,Land
Port:	chongqing,Cuntan,

Contact Now

Product Description

Product Attributes

Model No.: HVLS-DF555

Industrial Fan Type: traditional ceiling fan

Product Alias: Fan

Rated Voltage (V): 380/220

Rated Current (A): 3.6/5.8

Rated Power (KW): 1.5

Rotation Speed (rpm): 30-75

Maximum Air Volume (m ³/ Min): 12000

Maximum Action Area（㎡）: 1200

Noise(dBA): ≤57

Fan Blade Diameter(m&ft): 5.5（18′）

Packaging & Delivery

Selling Units	:	Set/Sets
Package Type	:	container
Picture Example	:

Product Description

Industrial Fans are widely used in the manufacturing industry due to their excellent ventilation and cooling effects. However, due to the relatively large volume of industrial fans and their fast speed during operation, mechanical injury can occur if objects are accidentally touched, so safety precautions must be taken. Specifically, when using industrial Traditional Ceiling Fans for workshop ventilation and cooling, the following safety precautions should be noted:

1、 Pay attention to avoiding electric leakage

Since the HVLS Fans needs to be powered on, it is necessary to take insulation measures. The workshop ventilation and cooling manufacturer emphasizes that the insulation performance of the product itself must meet the requirements, otherwise it will cause a leakage accident, which is one of the important reasons for causing danger and is likely to cause electric shock, so it is necessary to pay attention. At the same time, it is necessary to carry out relevant maintenance work, as insulation damage and leakage may occur due to aging during use. Therefore, it is necessary to check at regular intervals and take preventive measures.

Ceiling Fan With Large Air Volume

2、 Pay attention to installing protective nets and avoiding illegal operations

As an industrial fan for ventilation and cooling equipment in the workshop, if it is directly rotated naked, the rotating blade fan may pose a safety hazard. Therefore, in order to avoid this situation, it is necessary to put a mesh around it, and the mesh size should be based on the inability of fingers to pass through, so that the hands of the staff will not be injured. At the same time, the manufacturer of ventilation and cooling in the workshop reminds that it is absolutely not allowed to operate in flammable and explosive places in violation of regulations to avoid generating static electricity or flame, which may lead to fire or explosion.

Hot Products