Describe the building structure where the fan is installed
First show the equipment maintenance content of the Stand Fans: estimate the operation of the fan, whether there is any intermittent or abnormal noise. The operating status of the control box is not working properly. The shape of the leaves, whether they are clean or not, and their shaking. Clean up the leaves. Fan level condition. It is very important to check the tightening of each bolt. The building structure where the Industrial Fans manufacturer installs the fan. Reducer grease quantity. Galvanized steel wire rope tension tightness. Alignment situation. The cyclone structure of the
Determine the indoor humidity of the factory according to the size change of the wind speed level
Stand Fans technology is a series of products specially developed for energy saving and emission reduction and improving the comfort of the office environment. As we all know, the cool and comfortable effect is not only achieved through cooling and cooling, the area that the fan blows also depends on the diameter of the fan, which has nothing to do with the speed ratio of the Stand Fans, and the Industrial Fans with a low speed ratio and a large diameter The fan is a combination of this feature.
When cleaning Industrial Fans, it is necessary to grasp the appropriate way:
The cleaning of the Stand Fans is an essential job to maintain the service life and effect of the fan. When the fan is too dirty, if the company does not have a professional home appliance maintenance master, it is necessary to contact the Industrial Fans dealer to assign a professional cleaning staff Home service cleaning for security. 1. Use special tools for climbing to disassemble the blades and casing of the Stan
In previous ventilation schemes, people often decided which product and quantity to use based on the number of air changes in the space. This effect is very obvious in a small space, and you can even see with your own eyes that the steam in the bathroom is quickly discharged out of the room with the operation of the negative pressure fan. Fumes with a bad smell can be produced. Moisture, etc. are well dispersed and absorbed, thereby improving indoor air quality and obtaining a healthy, dry and safe working environment. Stand Fans installation personnel The installation personnel have bee
The airflow structure of the Stand Fans is different from that of ordinary small Stand Fans
In an open place, a Stand Fans can even cover a large area of 1400㎡. The airflow structure of the Stand Fans is also different from that of the ordinary small Stand Fans. The small Stand Fans can only cover the range of the diameter of the Stand Fans, while the Industrial Fans first pushes the airflow vertically to the ground, and then forms a 1-3 meter high airflow on the ground layer. After years of painstaking research and exploration, a propeller blade with outstanding performance has been developed by integrating foreign advanced aviation technology. It only needs to rotate slowly
Customized solutions according to the indoor ventilation capacity of Industrial Fans
Due to the large area of the Stand Fans factory, installing air conditioners seems to be a feasible solution. In fact, installing air conditioners has great health risks for employees. Installing an air conditioner requires a confined space, which will lead to poor air circulation. If the air conditioner is used for a long time, it will cause air-conditioning diseases, which will burden the employees' bodies. The wind blown by Industrial Fans is similar to natural wind, so there is no need to worry about the health of employees. Only when employees have a healthy body can they achieve better p
Generally, the rated power of the cooling fan with large blades of Industrial Fans is large.
The air generated by the Stand Fans gently slaps the body, promoting the volatilization of sweat to bring away heat, which cools the body and brings a refreshing feeling. Generally, this cooling effect can reach 5-8 ℃. Give the body a comfortable feeling of blowing. The three-dimensional blowing of the Industrial Fans makes the body more comfortable because of the natural breeze: on the one hand, the multi-directional three-dimensional blowing of the human body maximizes the evaporation area of the human body. On the other hand, the reason is that people have accumulated a close feelin
Industrial Fans are elegant and durable
When the Stand Fans is working, because the leaves of the Stand Fans periodically bear the pulsation force of the uneven air flow at the entrance and exit, causing noise. And the vibration of parts also constitutes the rotation noise. In addition, Industrial Fans manufacturers cause seepage attachment, vortex and vortex separation when the gas flows through the leaves, resulting in pulsation of the pressure distribution on the Stand Fans leaves and causing vortex noise. The noise caused by these three reasons can be comprehensively called "cutting wind noise". Generally, Industrial Fans
Examining the heat removal characteristics of energy-saving Stand Fans
You can keep it running at high speed for a long time, and then use your hands or other tools to recognize the heat value of the front shell of the Stand Fans. If you feel very hot when you touch it, it means that the heat dissipation performance of the energy-saving Stand Fans is not ideal. On the contrary, it means that the heat dissipation performance of the motor of the Industrial Fans is better. When the Industrial Fans is to be used in specific applications, there is no need to worry about the situation where the motor temperature rises too high and the energy-saving Stand Fans sto
Explain that Industrial Fans can instantly convert electromagnetic energy into mechanical energy
The power consumption is extremely low, and the maximum power is only 60W, which is equivalent to the power consumption of a small table lamp for general lighting fixtures. Therefore, from the perspective of saving resources, using a cooling fan in hot summer is undoubtedly the best choice . However, if the Stand Fans is used together with the central air conditioner, and the indoor temperature is set at 26°C to 28°C, it will save electricity and be cost-effective.
A brief introduction to the overall structure generally chooses high-quality materials
In a good environment, the competition among Stand Fans manufacturers is also tending to be good, which is conducive to promoting the improvement and improvement of Stand Fans technology. Its application field can be said to be very wide, almost all places that need cooling, ventilation, and ventilation can use this kind of Industrial Fans. The overall structure of Industrial Fans is mainly composed of motors, frames, fixed brackets, fan blades, air supply equipment, venetian blinds, safety nets and other components. The overall structure is generally made of high-quality stainless steel
The cooling effect of Industrial Fans is more obvious
The front, rear, left and right nets of high-quality Stand Fans generally use a dense mesh design. Products with this design have a high degree of safety during use, and the overall structure of the product is also more reasonable. In addition, to grasp the safety factor of the product, it is necessary to know in advance whether the Stand Fans is equipped with an overload protector. Having a protection device means that when an accident occurs to the Industrial Fans motor, the power can be automatically turned off, thereby greatly reducing the risk factor.
Good natural ventilation can improve the air
Large and medium-sized breeding plants: including but not limited to dairy farms, farms, farms, etc. The excellent natural ventilation of Industrial Fans manufacturers can improve the air index, dehumidify and dehumidify, deodorize, and reduce the disease rate of livestock. Appropriate temperature can make livestock feel comfortable, stimulate rapid growth of livestock, thereby increasing the productivity of stock livestock, and increasing the production of eggs, poultry, milk and meat.
A brief introduction to the basic principle of Industrial Fans cooling
In the past ventilation schemes of Stand Fans, everyone usually decided which product and quantity to choose based on the ventilation of the space. This is more effective in a small space, and you can even see the steam in the shower room quickly discharged out of the room with the operation of the abdominal pressure fan. However, in a spacious airtight environment, the effect of this ventilation is not obvious. For example, relatively
Some standards for detecting Industrial Fans
With its strong indoor ventilation ability, the Stand Fans can drive a large amount of air continuously to send the air to the ground and spread it along the ground. The Industrial Fans effectively promotes large-scale indoor and outdoor air convection, and replaces the room through air convection. In the hot and turbid heat flow, the coverage of an Industrial Fans is at least 2000 square meters. The product can truly achieve the purpose of purifying the indoor air, and through the AC air replacement method, the operation of the fresh air system can ensure the physical and mental health
Air circulation in Industrial Fans in tall, large and spacious confined spaces
In a relatively closed environment with no air circulation, many people, and a relatively closed environment, it is easy for microorganisms such as bacteria, viruses, fungi, and worms to proliferate. It is easy to cause respiratory irritation, colds, etc., and long-term exposure to dusty and hot working environments will not only affect the health of factory workers, but also seriously affect work efficiency.
More convenient, quick and reasonable Industrial Fans
Stand Fans in the production workshop will release a lot of energy due to the operation of various large-scale machinery, and will cause temperature deposits in the room due to the poor natural ventilation effect. Installing Industrial Fans can speed up the air circulation and circulation in the room The effect of the system can make the workers feel the coolness and comfort of the wind blowing gently, so as to achieve effective cooling and cooling, and a very comfortable and cool feeling.
The diameter of the Industrial Fans blade is large, and the cyclone commodity circulation
Through the strong air circulation ability, the Stand Fans drives a large amount of air continuously to send the air to the ground, and spreads it along the ground to effectively promote the large-scale indoor and outdoor air heat convection, and replace it through air heat convection In the hot and turbid heat flow in the room, the coverage of an Industrial Fans is at least 2000 square meters. The product can truly achieve the purpose of purifying the indoor air, and through the AC air replacement method, the operation of the fresh air system can ensure the air quality of the production
The Industrial Fans on the surface has the characteristics of waterproof and rainproof
The large Stand Fans cyclone liquid movement is relatively small in friction, so that the Stand Fans can drive a lot of air but requires relatively less energy than a small fan! Once the inertial force of the air is released, a large amount of air flows The inherent mechanical energy of the sex makes it possible to maintain the constant flow of air with little after-the-fact driving force. However, the cyclone friction of small and medium-sized cooling fans is relatively large, and most of the energy is consumed in the friction process. The surface of the Industrial Fans is waterproof an
Industrial Fan Safety Precautions
1. The Stand Fans galvanized steel wire safety device, four galvanized steel wires of suspension bridge with a diameter of 8 mm, each bearing a tensile strength of one ton, connects the fixed bracket of the reducer to the roof, and is firmly connected to the industrial factory building in the event of an accident hold on. 2. Stand Fans transmission device machine tool spindle bearing vertical ground plan design, a
In fact, Industrial Fans have high requirements for green environmental protection
Stand Fans are especially suitable for cooling warehouses and workshops that are tall and large, and have no heat source. They can be used in combination with industrial air coolers and industrial exhaust fans, and the effect is particularly good. But don't choose products with poor quality and no guarantee of safety. Industrial Fans can often cover such a large area because of the unique streamlined fan blade design, which can minimize frictional resistance and efficiently convert electromagnetic energy into mechanical energy of air. Industrial Fans can often cover such a large area bec
Talking about the advantages of Industrial Fans
1. Extremely high energy consumption level of Stand Fans: super large and soft high-efficiency light wind, multi-directional enhanced air circulation system, low investment, low cost, and maintenance-free. Wind-heavy low-speed ratio, super-large coverage. The cooling, warming, and dehumidifying effects make people comfortable throughout the year. The safety device combined with high performance and man-machine interaction, and safe and effective operation create a comfortable working space for you.
There are many differences between Industrial Fans and Stand Fans used in our homes
First of all, there will be a very big difference in body shape, but this kind of high-power fan also has many characteristics, for example, it has a super large coverage area, and Stand Fans used in industrial production sites will choose different aircraft Airfoil design, because this design can reduce the frictional resistance in the air, so that the electromagnetic energy can be efficiently converted into the driving force of the air, through this strong rotation ability, the exhaust area can be reduced Expansion to the maximum, so it is more suitable for application in some large-sc
Check the heat dissipation of Industrial Fans
If you want to test the heat dissipation performance of the Stand Fans, you can first keep it spinning quickly for a long time, and then use or other tools to check the heat value of the front shell of the Stand Fans. If you feel very hot when you touch it, it means that its heat dissipation performance is not ideal. On the contrary, it means that the cooling fan motor has better heat dissipation performance. In the case of actual application, there is no need to worry about the situation that the motor temperature rises too high and the Stand Fans stops rotating. The front, rear, left a
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.