Because HVLS Fans have good ventilation and cooling effects, they are widely used in the manufacturing industry. But because HVLS Fans are relatively large, and if an object accidentally hits an object, the HVLS Fans runs very fast, which can cause mechanical damage. Therefore, safety protection measures must be taken. Specifically, when using HVLS Fans to ventilate and cool the workshop, we should pay attention to the following safety matters:
1. Pay attention to avoid leakage. Because HVLS Fans need to be energized, insulation measures need to be taken. Ventilation and cooling manufacturers in workshops must ensure that the insulation performance of the product itself must meet the requirements. One of the important reasons may be electric shock due to this, so be careful.
At the same time, HVLS Fans manufacturers, that is, your suppliers, must do a good job in maintenance, because during use, insulation damage due to aging of equipment components may also lead to leakage. Therefore, preventive measures should be taken and annual inspections should be performed to ensure proper operation of the HVLS Fans in the coming year.
2. Pay attention to the installation of protective mesh covers to avoid improper operations, such as HVLS Fans used as ventilation and cooling equipment in the workshop. If the bare metal rotates directly, the rotating fan blades will pose a safety hazard. Therefore, there is mesh coverage around it, and the size of the mesh should be based on the standard that it cannot pass fingers. In this case, the staff's hands will not be injured. At the same time, workshop ventilation and cooling manufacturers remind you not to work illegally in flammable and explosive sites to avoid static electricity or flames, which may cause fires or explosions, to ensure the safety of HVLS Fans during use.
3. Through multiple safety measures, pay attention to the accidental fall of the fan or blade. Since HVLS Fans are usually installed on the roof of the workshop and rotate to provide ventilation and cooling effects in the workshop, multiple reinforcement measures must be taken in terms of the steel structure, not only tightening with bolts, but also wrapping additional steel wire ropes around the roof-related racks to Take more reinforcement measures. At the same time, during use, HVLS Fans suppliers should regularly check whether there is any looseness, so as to detect and prevent disease problems early.
