Regarding the precautions for the safe use of Industrial Fans, the three-pin plug of the Traditional Ceiling Fans power cord cannot be changed to a two-pin plug. When moving the Industrial Fans, the power supply should be cut off first, and the power cord of the Industrial Fans should not be pulled at will.
1. The Traditional
Ceiling Fans is one of the commonly used electrical appliances to cool down the home in summer. When using Industrial Fans, pay attention to the following:
①The three-pin plug of the Industrial Fans power cord cannot be changed to a two-pin plug. The vast majority of Traditional Ceiling Fans electric shock accidents are due to the replacement of the power plug, which makes the casing of the Industrial Fans electrified, resulting in personal electric shock accidents.
②When moving the Industrial Fans, the power supply should be cut off first, and the fan blades should stop rotating completely before moving. It is not allowed to move the Industrial Fans while the power is on.
③When the Industrial Fans is running normally, it is not allowed to artificially stop the rotation of the fan blades, and it is not allowed to touch the rotating fan blades with objects or human bodies. Doing so will cause the motor windings to overheat due to passing a large current, or even burn out, and endanger personal safety.
④ Do not pull the power cord of the Industrial Fans at will, let alone mop the power cord to avoid short circuit or leakage accidents.
⑤ It is not allowed to put wet clothes or wet towels on the Industrial Fans to dry. This will easily cause the Industrial Fans to leak electricity or the clothes will be twisted into the rotating fan blades, causing the motor of the Industrial Fans to burn out.
⑥Industrial Fans should be placed in places where children cannot reach or are not easy to reach, in case of accidents.
⑦ When storing Traditional Ceiling Fans, the rotating parts should be cleaned, refueled, wrapped up, and placed in a dry place properly.
2. In addition, before using Industrial Fans in summer, the following safety checks should be done:
① Check whether the components of the Traditional Ceiling Fans are firmly installed, especially pay attention to whether the screws fixing the fan blades are tightened, and check whether the fan blades rotate flexibly and whether there is any jamming phenomenon.
② Check the power plug and connection, there should be no damage, aging and other phenomena.
③ After turning on the power, you should use a test pen to check whether the Industrial Fans casing is powered, and you can use it only after confirming that there is no leakage of the Traditional Ceiling Fans.
