1. Check the reliability of the Industrial Fans suspension device every year before use. The best way to install an Industrial Fans is to use a steel structure on the ceiling prefabricated panel. If there are no steel bars on the ceiling, use steel bars with a diameter of about 8mm to lift them. Do not try to save time. Pay special attention when installing Industrial Fans. Rubber wheels are used to absorb shock.
2. Check the Industrial Fans once a year or so. Focus on checking whether the boom, screws, wiring board, blades and other parts of Industrial Fans are loose, corroded, rusted, cracked, deformed and other abnormal conditions. If there are loose screws, tighten them in time, and damaged parts should be replaced in time.
3. Check the wear degree of screws and pins every 2 to 3 years. If serious wear is found, replace them in time. Before using an Industrial Fans, it is best to test it when there is no one under the
Industrial Ceiling Fan. Through the trial operation, it can be seen that the Industrial Fans does not shake, smoke or burn during the rotation process, such as shaking, noise, Odor, etc., should be discovered in time during the trial operation, stop using it immediately, find out the cause and repair it before continuing to use it.
4. Start in a fast gear to reduce the number of Industrial Fans switch starts. Many people are accustomed to starting at a low setting, thinking that this not only saves power, but also protects parts and extends service life. In fact, this is counterproductive. The correct method is to start the fan in high gear first, and avoid starting it frequently, which will overheat the motor and shorten its service life.
5. Avoid continuous operations. If the Industrial Fans needs to run continuously, it is recommended to stop running after 2 to 3 hours and let the machine rest for a while to prevent the motor from overheating and burning out. If any abnormality is found during use, the machine should be shut down immediately. When using an Industrial Fans, do not Prevent people and other objects from coming into contact with a rotating Industrial Ceiling Fan by throwing things on top, which can cause mechanical damage and personal injury.
