1. Before turning on the Industrial Ceiling Fan, check whether the power circuit is intact, whether the ground wire is intact and reliable, and whether there are foreign objects on the wind wheel. After confirming safety, you can start using it.
2. The rubber wheels on Industrial Ceiling Fan serve as shock absorbers and cannot be discarded.
3. Do not throw anything under the Industrial Ceiling Fan; do not jump under the Industrial Ceiling Fan. Users with low indoor roof heights should pay more attention to avoid accidental injuries.
4. Special note is that babies are not allowed to be lifted under
Ceiling Fans with rotating
Industrial Fans. To prevent the human body and other objects from contacting the rotating Industrial Ceiling Fan and causing mechanical damage.
5. Check the reliability of the Industrial Fans suspension device before each use.
6. It is strictly prohibited to open or touch the Industrial Ceiling Fan with bare feet or wet hands.
7. Industrial Fans require regular inspection and maintenance during use. Check the boom, screws, terminal blocks and blades of Industrial Fans for looseness, corrosion, rust, cracks, deformation and other abnormalities. If loose screws are tightened in time, damaged parts should be replaced in time.
8. Before use, test the Industrial Ceiling Fan with no one under it. If abnormal shaking, abnormal noise, odor or sparks are found during the trial operation, please stop using it immediately, find out the cause and repair it before using it again.
9. Start the fast gear to reduce the number of times the Industrial Ceiling Fan switch is started. We should start the Industrial Fans in fast gear first, and then switch to slow gear and middle gear after the room cools down. This not only saves power, but also protects parts and extends the service life of the Industrial Fans. At the same time, it should be noted that frequent starting will cause the motor to overheat and shorten its service life.
10. Avoid continuous operations. If the Industrial Fans needs to run continuously, it should stop for a moment after 2 to 3 hours to prevent the motor from overheating and burning out. If any abnormality is found during use, it should be shut down immediately.
11. If you want to move the Industrial Fans, be sure to cut off the power supply. It is strictly prohibited to move the Industrial Ceiling Fan while it is running.
