Industrial Fans usage management regulations

Regarding the safety precautions for the use of Industrial Fans, the three-pin plug of the Industrial Fans power cord cannot be changed to a two-pin plug. When moving the Industrial Fans, the power supply should be cut off first. Do not pull the power cord of the Industrial Fans at will.

Industrial Fans are one of the commonly used electrical appliances for home cooling in summer. When using Industrial Fans, pay attention to the following matters:

1. The three-pin plug of the Industrial Fans power cord cannot be changed to a two-pin plug. The vast majority of electric shock accidents caused by Industrial Fans are due to the replacement of the power plug, which makes the casing of the Industrial Fans electrified, resulting in personal electric shock accidents.
2. When moving an Industrial Fans, you should first cut off the power supply and wait until the fan blades completely stop rotating before moving. It is not allowed to move the Industrial Fans while the power is on.
3. When the Industrial Fans is operating normally, you cannot artificially prevent the fan blades from rotating, nor can you use objects or the human body to touch the rotating fan blades. Doing so will cause the motor windings to overheat or even burn due to the large current flowing through them, and endanger personal safety.
4. Do not pull the power cord of the Industrial Fans at will, nor use a mop to clean the power cord to avoid short circuit or leakage accidents.
5. It is not allowed to put wet clothes or wet towels on Industrial Fans to dry them. This can easily cause the Industrial Fans to leak electricity or clothes to get caught in the rotating fan blades, causing the Industrial Fans motor to burn out.
6. Industrial Fans should be placed out of reach of children or difficult to access to prevent accidents.
7. When storing Industrial Fans, the rotating parts should be cleaned, refueled, bandaged, and properly placed in a dry place.