Recently, many customers have asked us, how to cool down the workshop? For a long time, the problem of cooling in the workshop has been a headache, because the workshop area is large and there are not many employees. If central air conditioning is used for overall cooling, the cost will be very high; using wall fans to cool it is ineffective and poses a safety hazard. So how to solve the problem of workshop cooling? In fact, it is very simple, Industrial Fans can do it, and the effect is very good!
1.
Industrial Ceiling Fan in workshops can promote huge airflow and achieve a large coverage area
The workshop uses large fans and unique airfoil designs to manufacture Industrial Fans. During operation, air resistance is minimized and electrical energy is effectively converted into kinetic energy of the air. Through the powerful air stirring ability, the fan blades push a large amount of air vertically to the ground, forming an airflow layer of 1-3m on the ground, forming a large coverage area that is not limited to the fan.
2. The workshop uses Industrial Fans with a full load power of 1.5KW, which has significant energy saving effect.
Depending on the model, the full motor power of the large fans used in the workshop is only 1.5KW, which is equivalent to consuming only 1.5 kilowatt hours of electricity per hour. In the workshop, if full coverage and heat dissipation effects are to be achieved, the energy-saving effect of the Industrial Ceiling Fan price is obvious, and a lot of price can be saved every year.
3. The use of Industrial Fans in the workshop brings natural three-dimensional air supply and improves human comfort
The circulator flow field formed by the Industrial Fans is similar to natural wind. The human body will feel three-dimensional wind from all directions, increasing the area for sweat evaporation and increasing comfort. At the same time, it is necessary to avoid using traditional high-speed fans all year round to cause various health problems to the human body under directional wind.
4. The Industrial Fans used in the workshop have long service life and guaranteed quality.
Strict quality assurance management and international quality product components and raw materials ensure product longevity.
After reading the above four points, do you think that the workshop cannot be cooled? Industrial Fans can do it. Not only can it be done, the key point is that it is very energy-saving. The price of an Industrial Ceiling Fan can cover an area of 1,800 square meters with an Industrial Ceiling Fan, but every hour Only consumes 1.5 kWh of electricity. This is not a concept. It is estimated that for the workshop, there is no better effect on the market than the price of Industrial Ceiling Fan. It is a more energy-efficient workshop cooling equipment.
