HVLS Fans have good ventilation effects and cover a large area. This kind of Hvls Ceiling Fans are usually installed on the ceiling of the workshop. The bearing capacity of the ceiling needs to be checked in advance, and additional reinforcement can be made if necessary. Then hang the assembled HVLS Fans on it. It needs regular maintenance after being used for a period of time.
The installation of HVLS Fans is a very detailed and serious technical implementation process. The quality of HVLS Fans installation has a great impact on the future use of HVLS Fans. The installation skills of HVLS Fans are divided into pre-installation and post-installation. There are two points to note before installation and four points to note during installation. Below are detailed installation tips. You can have a look:
(1)Before installation
1. Before installing the HVLS Fans, carefully check whether the HVLS Fans is intact, whether the fastening bolts are loose or fallen off, and whether the impeller collides with the windshield. Check carefully to see if the fan blades or louvers have not been deformed or damaged during shipping.
2. When installing and selecting the air outlet environment, pay attention to the fact that there should not be too many obstacles within the 2.5-3M range opposite the air outlet.
(2)During installation
1. Stable installation: When installing the HVLS Fans, pay attention to the horizontal position of the fan, adjust it to the level and stability of the HVLS Fans and the foundation plane, and do not tilt the rear motor after installation.
2. When installing the HVLS Fans, the adjusting bolt of the motor should be in a convenient position to adjust the belt tightness during use.
3. When installing the HVLS Fans bracket, ensure that the bracket and the foundation plane are level and stable. If necessary, install angle iron next to the HVLS Fans for reinforcement.
4. After installing the HVLS Fans, check the surrounding sealing. If there are gaps, they can be sealed with solar panels or glass glue.
In addition, after all steps of the HVLS Fans installation and construction are completed, conduct a completion acceptance inspection to check whether there are any tools or debris left inside the HVLS Fans. Touch the fan blades with your hands or levers to check whether there is excessive tightness or friction, and whether there are any objects that hinder the rotation. If there is no abnormality, the HVLS Fans must be shaken vigorously to check whether it is stable before power connection and cable pulling work can be performed.
