Industrial Fans are the main cooling choice for production personnel in the workshop. The ultra-large fan industry and traditional fans (shaking wall fans, floor fans) rely on high speed to produce different winds. The high-capacity and low-speed large fan (HVLS) industry uses large-diameter blades to rotate Drive a large amount of air to the ground, and form a certain height airflow layer close to the ground to move along the horizontal direction, so that the air circulates in the entire space; its speed is low, energy consumption is low, the air volume is large, and the coverage is large, creating softness in a large space. , The comfortable effect similar to natural wind improves the hot working environment, improves production efficiency, reduces employee losses, and saves energy; and it drives a large amount of air circulation, and can also eliminate moisture, remove odors, and improve indoor air quality.
1. Body cooling
The Industrial Fans generates a natural breeze to the body, encouraging sweat to evaporate to remove heat while cooling the body for a cool feeling. Usually, the cooling sensation can reach 5-8°C. Bring the comfortable experience of natural wind to the human body. The three-dimensional natural wind blown by the
PMSM Ceiling Fans makes the human body more comfortable, because: on the one hand, the multi-directional three-dimensional wind blows the human body to maximize the evaporation area of the human body. On the other hand, the reason is that human beings have accumulated an intimate experience of the natural wind in nature. Once the wind speed changes with the natural breeze, the human body will naturally feel comfortable and cool.
2. Natural ventilation
In ventilation schemes in the past, we usually decided which products and quantities to use based on the number of air changes in the space. In such a small space, the effect is so obvious that you can even watch the steam in the bathroom rush out of the house with the abdominal pressure fan. However, in a high and wide closed space, the ventilation effect is not obvious: for example, relatively large smoke, moisture, carbon dioxide and poor-quality air are still concentrated at the bottom of the building, and the negative pressure fans on the roof have a strong effect on the air in every corner. No impact, but that's where the people and equipment are. The PMSM
Ceiling Fans will promote the air mixing in the whole space, which can well disperse bad fumes such as odor, moisture, mold, etc., thereby improving the urban air quality and obtaining a healthy, dry and safe working environment
3. Environmental dehumidification
If the ventilation and cooling conditions in the building are poor, the product quality may be reduced, and it may even cause a lot of loss and waste! In addition, once some materials are damp and deformed, they will become the first object of customer complaints. Prevent air condensation, reduce bacteria and mold, Industrial Fans significantly enhance airflow, control air condensation on the ground or metal surfaces, can make your working environment cleaner, drier, more comfortable and safer. Drive away indoor heat waves and ensure the interior health of high-rise buildings.
4. Equilibrium temperature
In winter, the hot air generated by the air conditioner is concentrated on the top floor, while the ground temperature is moderate and low. Energy-saving Industrial Fans running at low speed slowly send hot air from the roof to the ground, balancing the indoor temperature and avoiding energy consumption caused by uneven temperature.
1) High-speed direct blowing has brought many health problems;
2) When running at high speed, it is easy to absorb dust in the air, and it is not easy to clean, which seriously affects the service life;
3) Small coverage and high energy consumption;
4) The use of industrial plants and tall stadiums will affect the aesthetics of workshops and stadiums.
5) It is very inconvenient to use and is likely to cause safety problems.
