Commercial Fan can solve ventilation and cooling problems in factory workshops

Commercial Fan can reach a diameter of 7.3M, cover an area of more than 1,000 square meters, and are also very energy-saving. Of course, Commercial Ceiling Fans have different diameter specifications and models, which are suitable for cooling in factories, cooling in shopping malls and supermarkets, and even different types of Commercial Ceiling Fans may be suitable between factories. The unique wing design of the industrial large ceiling fan reduces air resistance during operation and converts electrical energy into aerodynamic energy. Through the powerful air stirring ability, a large amount of air is pushed vertically to the ground, forming an airflow layer of 1-3m on the ground, thus forming an extremely large coverage area that is not limited to Commercial Ceiling Fans.

Commercial Fan are a series of products specially developed to save energy, reduce consumption and improve the comfort of the working environment. When cleaning the filter of a Commercial Fan, if the surface of the filter is already very dirty, there may be dirt or other dirt inside the switch contacts. . This situation is mostly caused by poor usage environment (smoke, dust, high temperature). Find the faulty part and perform maintenance, replacement and other corresponding treatment.
If you want the Commercial Fan to have a better and more ideal cooling effect, then use a fan-machine combination, that is, install the Commercial Fan and air cooler at the same time, so the effect will be better. Without an air cooler, there is no problem with the perceived cooling effect of a Commercial Fan, but it does not handle ambient temperatures well. When only using air coolers, a large number of air supply ducts must be installed suspended under the indoor roof, which affects the spatial beauty and safety of the building and increases investment costs. If the two are combined, the goals of ventilation, cooling, ventilation, economy, beauty and safety can all be achieved.